new Intel Firmware Package For E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter Intel Firmware Package For E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter Hewlett Packard Enterprise Microsoft Windows Server 2022 Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 VMware ESXi 8.0 Networking Server Firmware - Network English (US) Flash the PLDM firmware using any below methods

  1. Flash using iLOrest tool 
  2. Flash using Smart Update Manager (SUM).
  3. Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command.  See https://support.hpe.com to find and download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg> 

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

  • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)

  • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

  • Browse iLO IP using any browser and login using the credential 
  • Make sure the PLDM supported adapter is present in the server
  • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
  • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
  • Reboot the server for the firmware update to take effect.

Additional Information:

  • When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.
]]> This software package contains the following firmware versions for the below listed supported network adapters:

NIC EEPROM ID OROM Version NVM Version
Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter 80017787 1.3346.0 4.20

In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.2

]]> 8086 159B 8086 0005 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic HPE_E810_XXVDA2_SD_OCP_4p20_NCSIwPLDMoMCTP_80017787.fwpkg HPE_E810_XXVDA2_SD_OCP_4p20_NCSIwPLDMoMCTP_80017787.fwpkg file://./packages/HPE_E810_XXVDA2_SD_OCP_4p20_NCSIwPLDMoMCTP_80017787.fwpkg HPE_E810_XXVDA2_SD_OCP_4p20_NCSIwPLDMoMCTP_80017787.HPb HPE_E810_XXVDA2_SD_OCP_4p20_NCSIwPLDMoMCTP_80017787.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Intel E810-XXVDA2 OCP3 adapter 0 True HPE_E810_XXVDA2_SD_OCP_4p20_NCSIwPLDMoMCTP_80017787.HPb 120 1 True True True Firmware True a6b1a447-382a-5a4f-8086-159b80860005 4.20 FWPKG-v2 Firmware Bmc new Intel Firmware Package For E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 MCLK Adapter Intel Firmware Package For E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 MCLK Adapter Hewlett Packard Enterprise Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 Networking Server Firmware - Network English (US) Flash the PLDM firmware using any below methods

  1. Flash using iLOrest tool 
  2. Flash using Smart Update Manager (SUM).
  3. Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command.  See https://support.hpe.com to find and download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg> 

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

  • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)

  • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

  • Browse iLO IP using any browser and login using the credential 
  • Make sure the PLDM supported adapter is present in the server
  • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
  • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
  • Reboot the server for the firmware update to take effect.

Additional Information:

  • When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.
]]> This software package contains the following firmware versions for the below listed supported network adapters:

NIC EEPROM ID OROM Version NVM Version
Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 MCLK Adapter for HPE 8001778B 1.3346.0 4.20

In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.2

]]> 8086 1593 8086 000E Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic HPE_E810_XXV4T_O_SEC_4p20_PLDMoMCTP_8001778B.fwpkg HPE_E810_XXV4T_O_SEC_4p20_PLDMoMCTP_8001778B.fwpkg file://./packages/HPE_E810_XXV4T_O_SEC_4p20_PLDMoMCTP_8001778B.fwpkg HPE_E810_XXV4T_O_SEC_4p20_PLDMoMCTP_8001778B.HPb HPE_E810_XXV4T_O_SEC_4p20_PLDMoMCTP_8001778B.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Intel E810-XXVDA4T adapter 0 True HPE_E810_XXV4T_O_SEC_4p20_PLDMoMCTP_8001778B.HPb 120 1 True True True Firmware True a6b1a447-382a-5a4f-8086-15938086000e 4.20 FWPKG-v2 Firmware Bmc new Intel Firmware Package For E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 Adapter Intel Firmware Package For E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 Adapter Hewlett Packard Enterprise Microsoft Windows Server 2022 Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 VMware ESXi 8.0 Networking Server Firmware - Network English (US) Flash the PLDM firmware using any below methods

  1. Flash using iLOrest tool 
  2. Flash using Smart Update Manager (SUM).
  3. Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command.  See https://support.hpe.com to find and download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg> 

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

  • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)

  • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

  • Browse iLO IP using any browser and login using the credential 
  • Make sure the PLDM supported adapter is present in the server
  • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
  • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
  • Reboot the server for the firmware update to take effect.

Additional Information:

  • When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.
]]> This software package contains the following firmware versions for the below listed supported network adapters:

NIC EEPROM ID OROM Version NVM Version
Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 Adapter 8001778C 1.3346.0 4.20

In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.2

]]> 8086 159B 8086 0003 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic HPE_E810_XXVDA2_SD_4p20_PLDMoMCTP_8001778C.fwpkg HPE_E810_XXVDA2_SD_4p20_PLDMoMCTP_8001778C.fwpkg file://./packages/HPE_E810_XXVDA2_SD_4p20_PLDMoMCTP_8001778C.fwpkg HPE_E810_XXVDA2_SD_4p20_PLDMoMCTP_8001778C.HPb HPE_E810_XXVDA2_SD_4p20_PLDMoMCTP_8001778C.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Intel E810-XXVDA2 adapter 0 True HPE_E810_XXVDA2_SD_4p20_PLDMoMCTP_8001778C.HPb 120 1 True True True Firmware True a6b1a447-382a-5a4f-8086-159b80860003 4.20 FWPKG-v2 Firmware Bmc changed Integrated Smart Update Tools for Linux x64 Integrated Smart Update Tools for Linux Hewlett Packard Enterprise SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 9 Server Server ServerOptions Lights Out Application - System Management English (US) For prerequisite information, please see the iSUT Release Notes.

]]> Download the rpm package to a directory on your hard drive and change to that directory. Install by typing rpm -Uvh hpsut-XXX.x86_64.rpm.

]]> 103C 3307 1590 00E4 103C 3307 0000 0000 103C 3306 1590 00E4 103C 3306 0000 0000 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 0 software:rpm sut-5.3.0-10.linux.x86_64.rpm Enter Polling interval in minutes. Minimum 5 minutes Maximum 1440 minutes. 0 12 0-9 * Mode in which SUT runs. 0 24 * * Enter the directory where the staging has to be done. The default path for staging directory is /var/tmp/sut/stagingdirectory. 0 255 0..9A..Z;a..z;-/ * sut-5.3.0-10.linux.x86_64.rpm file://./packages/sut-5.3.0-10.linux.x86_64.rpm ./opt/hp/hpsut/README.txt ./opt/sut/README.txt ./opt/sut/bin/gatherlogs.sh ./opt/sut/bin/hpsut ./opt/sut/bin/sut ./opt/sut/bin/x64/sum_drop_table_x64 ./opt/sut/config/sut_cfg_default.dat ./opt/sut/doc/OnDemandHelp.txt ./opt/sut/schemas/SUT.json ./opt/sut/schemas/SUTProvider.json ./opt/sut/schemas/SUTProvider_Gen10.json ./opt/sut/schemas/SUTRegistryEN_Legacy_zipped.json.gz ./opt/sut/schemas/SUTRegistryEN_Redfish.json ./opt/sut/schemas/SUTRegistryEN_Redfish_zipped.json.gz ./opt/sut/schemas/SUTRegistryJP_Legacy_zipped.json.gz ./opt/sut/schemas/SUTRegistryJP_Redfish_zipped.json.gz ./opt/sut/schemas/SUTSchema_Legacy_zipped.json.gz ./opt/sut/schemas/SUTSchema_Redfish_zipped.json.gz ./opt/sut/schemas/SUTSettings.json ./opt/sut/schemas/SUTSettingsSchema_Legacy_zipped.json.gz ./opt/sut/schemas/SUTSettingsSchema_Redfish_zipped.json.gz ./opt/sut/schemas/SUTSettings_Gen10.json ./opt/sut/schemas/SUTSystemInventorySchema_Legacy_zipped.json.gz ./opt/sut/schemas/SUTSystemInventorySchema_Redfish_zipped.json.gz ./opt/sut/schemas/SUTTasksettings.json ./opt/sut/schemas/SUTTasksettings_Legacy_zipped.json.gz ./opt/sut/schemas/SUTTasksettings_Redfish_zipped.json.gz ./opt/sut/schemas/SUT_Gen10.json ./opt/sut/scripts/sut.service ./opt/sut/scripts/sutd ./usr/lib/.build-id ./usr/lib/.build-id/57 ./usr/lib/.build-id/57/374c6b2b55c3ea60f4ebaa7dfd1667b9b459f6 ./usr/lib/.build-id/7c ./usr/lib/.build-id/7c/d01fe263104c65c66707eca3d31d173f66dc7e ./usr/share/man/man8/sut.8.gz ./usr/share/smartupdate/sut/component.xml new Intel Firmware Package For E810-CQDA2 Ethernet 100Gb 2-port QSFP28 OCP3 Adapter Intel Firmware Package For E810-CQDA2 Ethernet 100Gb 2-port QSFP28 OCP3 Adapter Hewlett Packard Enterprise Microsoft Windows Server 2022 Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 VMware ESXi 8.0 Networking Server Firmware - Network English (US) Flash the PLDM firmware using any below methods

  1. Flash using iLOrest tool 
  2. Flash using Smart Update Manager (SUM).
  3. Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command.  See https://support.hpe.com to find and download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg> 

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

  • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)

  • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

  • Browse iLO IP using any browser and login using the credential 
  • Make sure the PLDM supported adapter is present in the server
  • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
  • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
  • Reboot the server for the firmware update to take effect.

Additional Information:

  • When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.
]]> This software package contains the following firmware versions for the below listed supported network adapters:

NIC EEPROM ID OROM Version NVM Version
Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 OCP3 Adapter 80017783 1.3346.0 4.20

In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.2

]]> 8086 1592 8086 0006 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic HPE_E810_CQDA2_OCP_4p20_NCSIwPLDMoMCTP_80017783.fwpkg HPE_E810_CQDA2_OCP_4p20_NCSIwPLDMoMCTP_80017783.fwpkg file://./packages/HPE_E810_CQDA2_OCP_4p20_NCSIwPLDMoMCTP_80017783.fwpkg HPE_E810_CQDA2_OCP_4p20_NCSIwPLDMoMCTP_80017783.HPb HPE_E810_CQDA2_OCP_4p20_NCSIwPLDMoMCTP_80017783.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Intel E810-CQDA2 OCP3 adapter 0 True HPE_E810_CQDA2_OCP_4p20_NCSIwPLDMoMCTP_80017783.HPb 120 1 True True True Firmware True a6b1a447-382a-5a4f-8086-159280860006 4.20 FWPKG-v2 Firmware Bmc new Intel Firmware Package For E810-CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter Intel Firmware Package For E810-CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter Hewlett Packard Enterprise Microsoft Windows Server 2022 Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 VMware ESXi 8.0 Networking Server Firmware - Network English (US) Flash the PLDM firmware using any below methods

  1. Flash using iLOrest tool 
  2. Flash using Smart Update Manager (SUM).
  3. Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command.  See https://support.hpe.com to find and download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg> 

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

  • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)

  • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

  • Browse iLO IP using any browser and login using the credential 
  • Make sure the PLDM supported adapter is present in the server
  • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
  • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
  • Reboot the server for the firmware update to take effect.

Additional Information:

  • When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.
]]> This software package contains the following firmware versions for the below listed supported network adapters:

NIC EEPROM ID OROM Version NVM Version
Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter 80017785 1.3346.0 4.20

In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.2

]]> 8086 1592 8086 0002 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic HPE_E810_CQDA2_4p20_PLDMoMCTP_80017785.fwpkg HPE_E810_CQDA2_4p20_PLDMoMCTP_80017785.fwpkg file://./packages/HPE_E810_CQDA2_4p20_PLDMoMCTP_80017785.fwpkg HPE_E810_CQDA2_4p20_PLDMoMCTP_80017785.HPb HPE_E810_CQDA2_4p20_PLDMoMCTP_80017785.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Intel E810-CQDA2 adapter 0 True HPE_E810_CQDA2_4p20_PLDMoMCTP_80017785.HPb 120 1 True True True Firmware True a6b1a447-382a-5a4f-8086-159280860002 4.20 FWPKG-v2 Firmware Bmc new Intel Firmware Package For E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter Intel Firmware Package For E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter Hewlett Packard Enterprise Microsoft Windows Server 2022 Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 VMware ESXi 8.0 Networking Server Firmware - Network English (US) Flash the PLDM firmware using any below methods

  1. Flash using iLOrest tool 
  2. Flash using Smart Update Manager (SUM).
  3. Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command.  See https://support.hpe.com to find and download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg> 

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

  • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)

  • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

  • Browse iLO IP using any browser and login using the credential 
  • Make sure the PLDM supported adapter is present in the server
  • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
  • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
  • Reboot the server for the firmware update to take effect.

Additional Information:

  • When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.
]]> This software package contains the following firmware versions for the below listed supported network adapters:

NIC EEPROM ID OROM Version NVM Version
Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter 80017789 1.3346.0 4.20

In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.2

]]> 8086 1593 8086 0005 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic HPE_E810_XXVDA4_FH_4p20_PLDMoMCTP_80017789.fwpkg HPE_E810_XXVDA4_FH_4p20_PLDMoMCTP_80017789.fwpkg file://./packages/HPE_E810_XXVDA4_FH_4p20_PLDMoMCTP_80017789.fwpkg HPE_E810_XXVDA4_FH_4p20_PLDMoMCTP_80017789.HPb HPE_E810_XXVDA4_FH_4p20_PLDMoMCTP_80017789.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Intel E810-XXVDA4 adapter 0 True HPE_E810_XXVDA4_FH_4p20_PLDMoMCTP_80017789.HPb 120 1 True True True Firmware True a6b1a447-382a-5a4f-8086-159380860005 4.20 FWPKG-v2 Firmware Bmc new Online ROM Flash Firmware Package - HPE Integrated Lights-Out 7 HPE Integrated Lights-Out 7 Hewlett Packard Enterprise VMware ESXi 9.0 VMware ESXi 8.0 Red Hat Enterprise Linux 9 Server Microsoft Windows Server 2022 Microsoft Windows Server 2025 Ubuntu 24.04 LTS SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 10 SUSE Linux Enterprise Server 16 Lights Out Server Firmware - Lights-Out Management English (US) Prerequisite for flashing fwpkg.

1. Download ".fwpkg"

2. Copy the contents from ".json" and create a file with the same name and save it in .json format [different file name and formats are not supported]

3. Place the files mentioned in 1 and 2 under the same folder

 

Now follow the steps mentioned in the Installation Notes for flashing the fwpkg.

 

Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities
for best performance:

  • RESTful Interface Tool (iLOREST) 7.2.0.0 and later
  • Snap-in (x64) 6.0.0

 

NOTE: Below Points are applicable only for Intel

  • Updated utilities and system libraries are required to support the iLO Secure standard, FIPS, and CNSA security states

  • The iLO RESTful API is the preferred programmatic interface for Gen12 systems

  • The preferred CLI and scripting tool is the RESTful Interface Tool (iLOREST)

]]> To flash this firmware package, download RESTFUL Interface Tool(iLORest) version 6.x.0 and later.

Download the firmware package and its corresponding json if available and ensure they are in same location.

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO7_IP_Address> -u <iLO7_username> -p <iLO7_password>

or

localhost OS example: 
ilorest flashfwpkg <file_name.fwpkg> -u <iLO7_username> -p <iLO7_password>

This firmware package can also be installed with Smart Update Manager (SUM) version 12.0.0 and later.

 

For Synergy, to determine if this release is supported independently of a Synergy Service Pack (SSP) and for Synergy specific installation instructions, refer to HPE Synergy Hotfixes - Compatibility and Support Guidelines.

]]> iLO 7 User Guide and Lights-Out Scripting Guide can also be found by following the links at:

http://www.hpe.com/info/ilo-docs

Select your lights-out product, then support & documents, then manuals.

  • Check the online help for additional information about how to use features. 
    Online help can be accessed from within the browser web pages by clicking the question mark in the upper right-hand corner of each page.

]]> 2F317B9D-C9E3-4D76-BFF6-B9D0D085A952 103c 3306 1590 03BA 103c 3307 1590 03BA Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 600 firmware:ilo7 ilo7_1.24.00.fwpkg ilo7_1.24.00.fwpkg file://./packages/ilo7_1.24.00.fwpkg ilo7_1.24.00.bin 2f317b9d-c9e3-4d76-bff6-b9d0d085a952 iLO 7 120 True ilo7_1.24.00.bin 600 1 False False False False Firmware False fb2b2f91-c952-4288-8389-21dee30eff07 1.24.00_pass_17 iLO 7 120 True ilo7_1.24.00.bin 600 1 False False False False Firmware False fb2b2f91-c952-4288-8389-21dee30e0007 1.24.00_pass_17 iLO 7 120 True ilo7_1.24.00.bin 600 1 False False False False Firmware False fb2b2f91-c952-4288-8389-21dee30e0107 1.24.00_pass_17 iLO 7 120 True ilo7_1.24.00.bin 600 1 False False False False Firmware False fb2b2f91-c952-4288-8389-21dee30e0207 1.24.00_pass_17 iLO 7 120 True ilo7_1.24.00.bin 600 1 False False False False Firmware False fb2b2f91-c952-4288-8389-21dee30e0307 1.24.00_pass_17 iLO 7 120 True ilo7_1.24.00.bin 600 1 False False False False Firmware False fb2b2f91-c952-4288-8389-21dee30e0407 1.24.00_pass_17 FWPKG-v2 ComboFirmware Bmc new Broadcom Firmware Package for BCM57504 SFP28 adapters Broadcom Firmware Package for BCM57504 SFP28 adapters Hewlett Packard Enterprise Microsoft Windows Server 2022 Microsoft Windows Server 2025 Red Hat Enterprise Linux 10 Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 VMware ESXi 8.0 VMware ESXi 9.0 Networking Server ServerOptions Firmware - Network English (US) Flash the PLDM firmware using any below methods

  1. Flash using iLOrest tool 
  2. Flash using Smart Update Manager (SUM).
  3. Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg> 

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

  • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

  • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

  • Browse iLO IP using any browser and login using the credential 
  • Make sure the PLDM supported adapter is present in the server
  • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
  • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
  • Reboot the server for the firmware update to take effect.

Additional Information:

  • When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.
]]>
  • This software package contains NVM Image version 235.1.164.7 with the following firmware versions:
    NIC Bootcode Version NCSI Version MBA Version UEFI Version RoCE Version
    Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 Adapter for HPE 235.1.220.0 235.1.220.0 235.1.220.0 235.1.220.0 235.1.218.0

    •  

    • Recommend to upgrade to the NVM Image version 226.1.107.0 firmware first for this firmware package, please refer to the following link.

    https://www.hpe.com/global/swpublishing/MTX-99a59d3b36404166b10a37a3b3

     

    ]]>         14e4 1801 14e4 1599 14e4 1804 14e4 1599 14E4 1751 14E4 1599 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic BCM235.1.220.0_BCM957504-P425H.fwpkg BCM235.1.220.0_BCM957504-P425H.fwpkg file://./packages/BCM235.1.220.0_BCM957504-P425H.fwpkg BCM235.1.220.0_BCM957504-P425H.HPb BCM235.1.220.0_BCM957504-P425H.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Broadcom NetXtreme-E BCM57504 SFP28 Adapter 0 False BCM235.1.220.0_BCM957504-P425H.HPb 360 1 False True False False Firmware True a6b1a447-382a-5a4f-14e4-175114e41599 235.1.220.0 Broadcom NetXtreme-E BCM57504 SFP28 Adapter 0 False BCM235.1.220.0_BCM957504-P425H.HPb 360 1 False True False False Firmware True a6b1a447-382a-5a4f-14e4-180114e41599 235.1.220.0 Broadcom NetXtreme-E BCM57504 SFP28 Adapter 0 False BCM235.1.220.0_BCM957504-P425H.HPb 360 1 False True False False Firmware True a6b1a447-382a-5a4f-14e4-180414e41599 235.1.220.0 FWPKG-v2 ComboFirmware Uefi     new Broadcom Firmware Package for BCM57504 SFP28 OCP3 adapters Broadcom Firmware Package for BCM57504 SFP28 OCP3 adapters Hewlett Packard Enterprise Microsoft Windows Server 2022 Microsoft Windows Server 2025 Red Hat Enterprise Linux 10 Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 VMware ESXi 8.0 VMware ESXi 9.0 Networking Server ServerOptions Firmware - Network English (US) Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.

    Additional Information:

    • When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.
    ]]>
  • This software package contains NVM Image version 235.1.164.7 with the following firmware versions:
    NIC Bootcode Version NCSI Version MBA Version UEFI Version RoCE Version
    Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter for HPE  235.1.220.0 235.1.220.0 235.1.220.0 235.1.220.0 235.1.218.0

    •  

    • Recommend to upgrade to the NVM Image version 226.1.107.0 firmware first for this firmware package, please refer to the following link.

    https://www.hpe.com/global/swpublishing/MTX-99a59d3b36404166b10a37a3b3

     

    ]]>         14e4 1801 14e4 1598 14e4 1804 14e4 1598 14E4 1751 14E4 1598 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic BCM235.1.220.0_BCM957504-N425H.fwpkg BCM235.1.220.0_BCM957504-N425H.fwpkg file://./packages/BCM235.1.220.0_BCM957504-N425H.fwpkg BCM235.1.220.0_BCM957504-N425H.HPb BCM235.1.220.0_BCM957504-N425H.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Broadcom NetXtreme-E BCM57504 SFP28 OCP3 Adapter 0 False BCM235.1.220.0_BCM957504-N425H.HPb 360 1 False True False False Firmware True a6b1a447-382a-5a4f-14e4-175114e41598 235.1.220.0 Broadcom NetXtreme-E BCM57504 SFP28 OCP3 Adapter 0 False BCM235.1.220.0_BCM957504-N425H.HPb 360 1 False True False False Firmware True a6b1a447-382a-5a4f-14e4-180114e41598 235.1.220.0 Broadcom NetXtreme-E BCM57504 SFP28 OCP3 Adapter 0 False BCM235.1.220.0_BCM957504-N425H.HPb 360 1 False True False False Firmware True a6b1a447-382a-5a4f-14e4-180414e41598 235.1.220.0 FWPKG-v2 ComboFirmware Uefi     new Intel Firmware Package For E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter Intel Firmware Package For E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter Hewlett Packard Enterprise Microsoft Windows Server 2022 Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 VMware ESXi 8.0 Networking Server Firmware - Network English (US) Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See https://support.hpe.com to find and download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.

    Additional Information:

    • When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.
    ]]>         This software package contains the following firmware versions for the below listed supported network adapters:

    NIC EEPROM ID OROM Version NVM Version
    Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 OCP3 80017788 1.3346.0 4.20

    In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.2

    ]]>         8086 1593 8086 000C Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic HPE_E810_XXV4_OCP_4p20_NCSIwPLDMoMCTP_80017788.fwpkg HPE_E810_XXV4_OCP_4p20_NCSIwPLDMoMCTP_80017788.fwpkg file://./packages/HPE_E810_XXV4_OCP_4p20_NCSIwPLDMoMCTP_80017788.fwpkg HPE_E810_XXV4_OCP_4p20_NCSIwPLDMoMCTP_80017788.HPb HPE_E810_XXV4_OCP_4p20_NCSIwPLDMoMCTP_80017788.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Intel E810-XXVDA4 OCP3 adapter 0 True HPE_E810_XXV4_OCP_4p20_NCSIwPLDMoMCTP_80017788.HPb 120 1 True True True Firmware True a6b1a447-382a-5a4f-8086-15938086000c 4.20 FWPKG-v2 Firmware Bmc     new Intel Firmware Package For E810-2CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter Intel Firmware Package For E810-2CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter Hewlett Packard Enterprise Microsoft Windows Server 2022 Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 VMware ESXi 8.0 Networking Server Firmware - Network English (US) Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See https://support.hpe.com to find and download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.

    Additional Information:

    • When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.
    ]]>         This software package contains the following firmware versions for the below listed supported network adapters:

    NIC EEPROM ID OROM Version NVM Version
    Intel E810-2CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter 80017784 1.3346.0 4.20

    In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.2

    ]]>         8086 1592 8086 000E Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic HPE_E810_2CQDA2_O_SEC_4p20_PLDMoMCTP_80017784.fwpkg HPE_E810_2CQDA2_O_SEC_4p20_PLDMoMCTP_80017784.fwpkg file://./packages/HPE_E810_2CQDA2_O_SEC_4p20_PLDMoMCTP_80017784.fwpkg HPE_E810_2CQDA2_O_SEC_4p20_PLDMoMCTP_80017784.HPb HPE_E810_2CQDA2_O_SEC_4p20_PLDMoMCTP_80017784.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Intel E810-2CQDA2 adapter 0 True HPE_E810_2CQDA2_O_SEC_4p20_PLDMoMCTP_80017784.HPb 120 1 True True True Firmware True a6b1a447-382a-5a4f-8086-15928086000e 4.20 FWPKG-v2 Firmware Bmc