;--------------------------------------------------------------------------;
;                                                                          ;
;                                                                          ;
;      ------------         Bit-Bucket Software, Co.                       ;
;      \ 10001101 /         Writers and Distributors of                    ;
;       \ 011110 /          Freely Available<tm> Software.                 ;
;        \ 1011 /                                                          ;
;         ------                                                           ;
;                                                                          ;
;  (C) Copyright 1987-90, Bit Bucket Software Co., a Delaware Corporation. ;
;                                                                          ;
;                                                                          ;
;               ENGLISH language text for BinkleyTerm 3.02a Unix           ;
;                                                                          ;
;                                                                          ;
;    For complete  details  of the licensing restrictions, please refer    ;
;    to the License  agreement,  which  is published in its entirety in    ;
;    the MAKEFILE and BT.C, and also contained in the file LICENSE.240.    ;
;                                                                          ;
;    USE  OF THIS FILE IS SUBJECT TO THE  RESTRICTIONS CONTAINED IN THE    ;
;    BINKLEYTERM  LICENSING  AGREEMENT.  IF YOU DO NOT FIND THE TEXT OF    ;
;    THIS  AGREEMENT IN ANY OF THE  AFOREMENTIONED FILES,  OR IF YOU DO    ;
;    NOT HAVE THESE FILES,  YOU  SHOULD  IMMEDIATELY CONTACT BIT BUCKET    ;
;    SOFTWARE CO.  AT ONE OF THE  ADDRESSES  LISTED BELOW.  IN NO EVENT    ;
;    SHOULD YOU  PROCEED TO USE THIS FILE  WITHOUT HAVING  ACCEPTED THE    ;
;    TERMS  OF  THE  BINKLEYTERM  LICENSING  AGREEMENT,  OR  SUCH OTHER    ;
;    AGREEMENT AS YOU ARE ABLE TO REACH WITH BIT BUCKET SOFTWARE, CO.      ;
;                                                                          ;
;                                                                          ;
; You can contact Bit Bucket Software Co. at any one of the following      ;
; addresses:                                                               ;
;                                                                          ;
; Bit Bucket Software Co.        FidoNet  1:104/501, 1:132/491, 1:141/491  ;
; P.O. Box 460398                AlterNet 7:491/0                          ;
; Aurora, CO 80046               BBS-Net  86:2030/1                        ;
;                                Internet f491.n132.z1.fidonet.org         ;
;                                                                          ;
; Please feel free to contact us at any time to share your comments about  ;
; our software and/or licensing policies.                                  ;
;--------------------------------------------------------------------------;
;
; We really should tell you what these all correspond to, but since
; release is imminent, we don't have the time.  In general, if there
; is a single trailing space, it is significant.  If there are
; multiple trailing spaces, then that field can be no longer than the
; current line length.
;
; All lines starting with ';' are comments
; Comments may be put on any individual line using ';' as leftmost character
;
; Compiler converts '\n' and '\r' for you.
; 
; The following line contains the record count and version number
; Record count should be one greater than X_TOTAL_MSGS in MSG.H !!
386 3
;----------------------------------------------------------------------
;
; Start of message text below
;
:Dialing %s with script '%s'
!Could not open script %s
+Master script timer expired
+Script '%s' failed at line %d
!Revision 3 FOSSIL does not support BREAK signal
!Too many labels in script
Macro number
is out of range 1-9
Shell number
Illegal zone: %s\n
Requests Allowed
LogLevel must be 1-5 - %s is unknown\n
Ridiculous MAXport value: %s\n
Illegal port: %s\n
Illegal CARRIER mask: %s\n
key
call
Unknown or illegal config line: %s\n
!Directory '%s' does not exist!
 BinkleyTerm may fail to execute properly because of this!\n
!Created new directory '%s'
!and can not be created.
\rPress <Escape> to enter BBS.\r
\r\rProcessing Mail. Please hang up.\r\r
+Nothing to send to %s
!Connection attempt aborted
#Modem hang up sequence
:No outgoing file requests
:Outbound file requests
:End of outbound file requests
*File Requests declined
\r\r* Address %s Using %s\r\n
Intro: 
*Remote didn't respond
*Lost Carrier
*Password-protected session
!Password Error from %s: His='%s' Ours='%s'
!Called %s and got %s
:WaZOO method:
*End of WaZOO Session
 Sending Mail Packet
Open
 Keyboard Escape
 File %s truncated
+Dupe file renamed: %s
 Open Character Device
 Too many errors
 File %s deleted
 Transfer cancelled
!Couldn't open CTL file: %s
Darn!  The FOSSIL seems to have gone away!  Exiting
Cannot re-open logfile
FOSSIL: %Fs
FOSSIL: Revision Level 3 Assumed
:Starting Event %d
#Exit at start of event with errorlevel %d
#Running clean/pack sequence
#System re-enabled after clean/pack sequence
!Date rollover problem?
:Exiting to BBS with Errorlevel %u
:Spawning BBS
:Returned from BBS
:Exiting to external mailer with Errorlevel %u
#Setting baud to %u
*Remote Uses
Version
Program
*Sending mail using FTS-0001 compatible fallback
*Refusing inbound file requests
!Tired of waiting for other end.
*End of FTS-0001 compatible session
*Receiving mail using FTS-0001 compatible fallback
*Giving mail to %s
*Node %s refused to pickup mail
!Memory overflow error
Outbound
File Attaches
*Making file request
End of
*Receiving inbound mail
*Pickup is turned off - refusing mail.
Inbound
Mail Packet
!Password Error assumed
!Mail Packet '%s' cannot be renamed
!Mail Packet renamed to '%s'
Can't find protocol module:
Duplicate protocol name:
*Processing node %s -- %s
!Couldn't find Address: %s
!Disconnecting nuisance caller
!No BOSS in the nodelist
!Unable to open %s
!Unable to allocate memory for Nodelist Index
!Failed to read nodelist index into memory
!Unable to position to node record in %s
!Not able to read node record from %s
File Requests
:%d matching files sent
!Bad Bark Request Data - streaming garbage
!Bad crc - trying again
!System misconfigured or no entry in Nodelist
 Event %d - Waiting
:Incoming call, dial aborted
Dynamic Event
:Exit requested from keyboard
:Function key exit - errorlevel %d
 Disabling Modem
:Invoking Message Reader
:Message Reader returned to BinkleyTerm
 Enabling Modem
!No Message Reader to invoke
!Could not do GET
!Could not do KILL
:Entering POLL Mode
:Poll completed
!Could not do SEND
:Keyboard request to enter terminal mode
:Polling Boss Node
:Executing keyboard shell %d
:Returning from keyboard shell
!No keyboard shell %d
 Junk character from keyboard - continuing
:Shelling to Command Interpreter
\r\nType EXIT to return to BinkleyTerm\r\n
:BinkleyTerm Reactivated
!Calls not permitted during this event.
 Immediate call requested
\rPlease enter a net/node number: 
Currently Polling Node 
; NB These next 5 must be padded out with spaces to be 7 letters
Init   
Waiting
Dialing
HangUp 
Connect
:Dialing %s
Ending time wraps through midnight - not allowed\n
'%s' has an invalid START-TIME\n
'%s' has an invalid END-TIME\n
'%s' has bad AvgWait (higher than max of 1800 or less than min of 0)\n
'%s' has a bad Errorlevel code\n
'%s' has a bad number of Tries\n
'%s' has something indecipherable\n
'%s' has an invalid DAY field\n
Nothing in Outbound Area
Node                   Status
!Insufficient data for session
+End of connection attempt
!Still have mail for %s
:Exit after compressed mail with errorlevel %d
:Exit after file extension '%s' with errorlevel %d
:Exit after receiving mail with errorlevel %d
:Received mail, running 'AfterMail' program
#Re-enabling system following 'AfterMail' program
Setting
 to initial speed of 
 baud. Press [ALT-0] for HELP.\r\n
Multi-Tasker: 
 Current Settings 
 Today at a Glance 
 Pending Outbound Mail 
Initializing System
 Recent Activity 
 Transfer Status 
Event:
Port: 
Status: Init
BBS/Mail:  
Calls Out: 
Good/Cost: 
Files I/O: 
Last: 
Press [ALT-0] For Help 
Node: %s
Point: %s
!Password override for outgoing call
\r**Zmodem Autodownload initiated\r\n
\r**Zmodem Autodownload finished\r\n
\r\nBinkleyTerm now communicating at 
\r\nPlease enter a phone (or net/node) number: 
\r\nUnable to force carrier drop by dropping DTR!\r\n
\r\nWelcome back!\r\n
\r\nLog file name: 
\r\nBinkleyTerm now in MAILER mode\r\n
BinkleyTerm now in MANUAL mode\r\n
\r\nBinkleyTerm now using COM
\r\nBinkleyTerm is ready to SEND a file...\r\n
Which Protocol do you want BinkleyTerm to use?\r\n
\r\nBinkleyTerm is ready to RECEIVE a file...\r\n
\r\nSending BREAK signal\r\n
Done\r\n
\r\nYou are using 
Sorry. I don't know that protocol, returning to terminal mode.\r\n
Filename to SEND: 
OK....Choose! 
Filename to GET: 
\r\nLogfile %s closed.\r\n
\r\nCould not open logfile %s\r\n
\r\nLogfile %s open.\r\n
:Connection terminated
Switching back to
Polling:
 GET a File 
Address to GET from:
Password to use:
Are you sure (Y/N)?
Yes
No
 SEND a File 
Address to SEND to:
 KILL outbound mail 
Address to KILL:
Kill ALL mail? 
drats
No Send - Remote Hung Up
+Corrected %d errors in %ld blocks
+Sent
+Remote Synchronizing to Offset %ld
!Temporary receive file '%s' could not be opened
+Already have %s
+Synchronizing to End of File
+Synchronizing to Offset %ld
+Received
!Original name of %s could not be used
!EOT not expected until block %ld
*Remote System
UNKNOWN - FTS-0001 Mailer
System Initializing.  Please wait...\n
\r\nUnrecognized option: %s\r\n
\r\nThanks for using %s,\r\n
Another fine User-DEVELOPED software package!\r\n
+Remote refused %s
!Error
Can't
+CPS: %lu (%lu bytes)  Efficiency: %lu%%
Compressed Mail
Net File
Elapsed
Trouble?
Resending from %s
Send %ld blks of %s (%ld bytes)
Update
File
Request
:Executing
!Carrier lost, request(s) aborted
!File Request limit exceeded
!Event Overrun - requests aborted
No AVAIL list
No ABOUT file
!OKFILE Error `%s'
!Request password error: '%s' '%s' '%s'
Rcv %ld blks of %s from %s (%ld bytes)
Timeout
Checksum
CRC
Junk Block
on block
Find
Read
Seek
Short Block
Close
Unlink
Write
SKIP command received
F1 ... F10 = input phone number, (ENTER) = start, (ESC) = abort\r\n
ALT-Fn = load saved set (n), Shift-Fn = save into set (n)\r\n
User set last loaded/saved: %d\r\n
Phone Numbers currently Selected:\r\n\r\n
; Trailing space...
\r\nInput Command: 
Element Chosen = %2d\r\n
Currently contains %s\r\n
(ENTER) = save, (space)(ENTER) = delete, or enter new number:\r\n
(ENTER) or (space)(ENTER) = cancel, or enter new number:\r\n
Error reading data from set %d\r\n
Error closing file for set %d\r\n
Set %d successfully loaded.\r\n
Error writing data to set %d\r\n
Current list of numbers saved to set %d\r\n
Press ENTER to continue...
#Starting Phone List Scan
#Connected to list element %d
Debris
Long pkt
!Ignoring `%s'
!Out of disk space
Receiving
!Zmodem Init Problem %s
bad position
!Zmodem Recv Problem %s
Bad packet at %ld
Send
Recv
!Other end died
!Dropping to one-way xfer
+Refusing %s
!Unknown packet type %d
!Session aborted
#Sending %s
!Can't decode file length
*Finished partial file %s
*Saving partial file %s
*Remote can't handle file requests
;----------------------------------------------------------------------
;
; Terminal mode help
;
You now have BinkleyTerm in DUMB TERMINAL mode.\r\n
In DUMB TERMINAL mode the following special keys are enabled:\r\n\r\n
Alt-B   Cycle baud rate              Alt-C   Change communications parameters\r\n
Alt-D   Dial a system                Alt-E   Erase the current screen\r\n
Alt-H   Hang up by dropping DTR      Alt-I   Initialize the modem\r\n
Alt-J   Jump to Command Shell        Alt-L   Start/stop logging to a file\r\n
Alt-M   Manual poll                  Alt-P   Cycle communications port\r\n
Alt-R   Redial from a 'scan list'    Alt-S   Send BREAK signal to port\r\n
Alt-U   Go to UNATTENDED MAILER mode Alt-V   Show BinkleyTerm version\r\n
Alt-X   Exit BinkleyTerm             Alt-Y   Call boss node for mail\r\n
Shift-Up Send a file (UPLOAD)     Shift-Down Receive a file (DOWNLOAD)\r\n
Alt-F%-2d Macro string '%s'\r\n
Press a key to continue...
;----------------------------------------------------------------------
;
; The next 18 lines are the unattended mailer help
;
You now have BinkleyTerm in UNATTENDED MAILER mode.\r\n
In UNATTENDED MAILER mode the following special keys are enabled:\r\n
 ALT-A  Answer Modem                   ALT-Y  Call boss for mail\r\n
 ALT-C  Clear 'Today' window           ALT-Z  Zoom outbound window\r\n
 ALT-F  Toggle Nice Outbound Display\r\n
 ALT-G  Get Files (File request)       C      make next call immediately\r\n
 ALT-I  Initialize the modem           $      Reset Bad Mail Status\r\n
 ALT-J  Execute Command Shell          Esc    Execute shell command\r\n
 ALT-K  Kill mail to a node            Undo   Terminal Mode\r\n
 ALT-M  Manually POLL a node           CTRL-F Change Mail Flavour\r\n
 ALT-O  Re-read Outbound areas         CTRL-Q Quit with errorlevel 1\r\n
 ALT-Q  Quit the current event\r\n
 ALT-R  Re-start mail events           Cursorkeys CLR/Home scroll the\r\n
 ALT-S  Send files                     'pending' window.\r\n
 ALT-T  Enter Terminal mode\r\n
 ALT-W  Redraw screen                  F1..F10 exit BinkleyTerm with\r\n
 ALT-X  Quit BT with ERRORLEVEL 1      errorlevel 10n (F1=10, F2=20)\r\n
;----------------------------------------------------------------------
; Special mailer help
;
 ALT-B        Blank the screen immediately\r\n
 ALT-E/CTRL-M Execute '%s' as message editor\r\n
 ALT-F%-2d      Execute '%s'\r\n
;----------------------------------------------------------------------
;
; The following 3-line message is system dependent.
;
The tty port can not be initialised.\r\n
Perhaps you should check that no other processes are locking the port\r\n
and your RS232 lead is connected properly,\r\n
;----------------------------------------------------------------------
;
!Could not create temp flagfile %s
 Created flagfile %s
 Other node sending to %s
!Erroneous attempt to clear flag for %s
 Deleted flagfile %s
!Unable to delete flag file %s
!Exceeded file request byte limit
 Nodelist index refresh necessary
Couldn't set SIGINT
 Modem protocol negotation filtered
Event %d starts in %d minutes
Flags for next event: %s
;----------------------------------------------------------------------
; Extensions for ATARI ST
;
:Nothing in Outbound Area
Execute Command.  Esc to abort.  Return for shell.
\nPress a key to return to Binkleyterm
!Mail Not changed
Change Mail Flavour
Address To Change: 
Change From (C/H/D/N)? 
Change To (C/H/D/N)? 
!Warning: Address (%s) used in KEY is not defined!
!         KEY's must be defined After Addresses!"
#Killing $$ files
begin
free memory
end
:Other Node Processing Mail
:Executing shell %d
:Returning from shell
!No YOOHOO/2U2
;----------------------------------------------------------------------
; EMSI protocol
;
!Couldn't allocate memory for EMSI_DAT
:EMSI method:
*End of EMSI Session
No Compatible Protocol
!Exceeded file request time limit
*Session with %s Time: %02ld:%02ld:%02ld Cost: $%ld.%02ld
*Remote Address: %s
+System: %s
:Location: %s
+SysOp: %s
>Phone: %s
>Baud: %s
>Flags: %s
#Sending mail for %s
#EMSI: %d files sent
!No session password defined for address %s
;----------------------------------------------------------------------
